Best way to install carpet

Showcase the beauty of wood stairs without sacrificing the comfort of carpeting with this clever compromise: a carpet runner. This narrow carpet operates down the center associated with the staircase, leaving some wood revealed for each side of the tread while still providing all advantages of carpet, particularly extra grip, cushioning, and sound reduction. It’s the very best of both globes! Plus, it's feasible to perform this installation project in only several hours. Simply take it one-step at a time.

TOOLS AND MATERIALS
- Tape measure
- Tack strips
- Hammer
- Fingernails
- Carpet cushioning
- energy knife
- Hammer tacker
- Staples
- Carpet runner
- Carpet awl
- Knee kicker
- Carpet sheers or carpeting blade

1
Just before begin installing your carpet, you need to determine the look you prefer in your house. There are two main methods for installing carpet on stairs: the Hollywood strategy together with waterfall strategy.

• The Hollywood technique securely wraps the carpet throughout the advantage the tread and round the nosing (and/or forward side) of each action, then fastens it down on the riser for a clear and contoured appearance. Its tailored look makes this a popular choice for more visible stairways in the home, such as those leading up from family area or foyer.

• The waterfall technique, however, offers a less complicated installation, where the carpet is honored the side of the tread, after that dropped straight down to generally meet the back of the following tread—all without acquiring it towards riser. This much more everyday, cascading design is actually set aside for basement stairs or tasks concerning thick, nubby carpeting that's more difficult to control.

STEP TWO
Next up: Time to pick a carpeting. Out of all the possibilities to you, a machine-hemmed, prefabricated stair runner is considered the most convenient option for simple set up. Carpet runner can, however, be cut and hemmed from any wall-to-wall carpeting roll; simply know that each side must be stitched with a border to stop fraying before starting. This hemming process needs an unique sewing-machine utilized by carpet professionals, so you’ll want to employ an expert and supply complete measurements (see step three) for a custom slice.

STEP THREE
Whether you intend to pick up a runner which all set to go, or create some thing completely custom, you’ll very first need certainly to gather all required dimensions. Begin with the best width of one's runner. Pre-hemmed athletes are usually sold in just one of a few widths, most commonly 27 and 32 inches, so pick the one which fits your tread size with the maximum amount of (or only a small amount) lumber showing as desired. In the event that you want to have a runner custom cut (or you need help visualizing exactly how your stairs would appear partly covered with a carpet runner), take to draping brown kraft paper or an appartment sheet collapsed lengthwise to look for the right runner width.

After that, to calculate the size of your stair runner, add your measurements for the depth associated with stair tread plus the height of riser, then multiply this amount by the amount of stairs. If you'd like the Hollywood style of carpeting, you’ll need a little additional size being have sufficient share with fasten the runner completely; add one inch for every nosing as well as least 18 extra ins for free.

STEP
Ready your stairs for carpeting installation by installing tack pieces, slim bits of wood resembling yardsticks with tacks pointing up. These will grip the carpeting backing and hold it in place.

Cut your tack pieces into lengths which are four inches faster compared to the width of the selected runner, after that count on two pieces for every stair. Nail one on each riser, focused, ¼ inch from base, and something for each tread, ¼ inch through the back, additionally focused. Make certain that the pieces position in toward each other, so that the things of the tacks can come close to holding.